HomeProductea
 
  LED(Light Emitting Diode) LAMP TRAINER   ED-9810
• Practice basic method how to operate such as basic operation, Constant voltage, 
  Constant current, serial connection, and parallel connection
• Brightness control, Color control, and lighting
• Simulation for Steady/PWM
• Brightness control for AC LED
• Digital and analogue VLC
• Monitoring control operation data and basic circuit data
• Control and monitoring using PC(LabVIEW) and Embedded GUI
EMBEDDED BOARD
• H/W
  » CPU : PXA270(520MHz)
  » FLASH : 32MByte
  » SDRAM : 128MByte(32bits Access)
  » SRAM : 1MByte(32bits Access)
  » TFT LCD : Touch Pad(7inch), 16bits, 800 x 480
  » Ethernet : 10Mbps Ethernet(CS8900A)-1Port
  » Serial Port : FF, ST, BT UART
  » USB 1.1 : Bluetooth UART-1Port(VLC use)
  » Touch : Host(SL811HST), Client ADS7846
  » Slot : MMC/SD-1 Slot
  » Stereo I/O : Cirrus CS4202
  » VLC I/O : 24Pin x 2 Connector
  » Multi-ICE : Multi-ICE 20Pin Connector
  » JTAG : PC Interface 10Pin Connector

• OS
  » Kernel : Linux 2.6.17
  » Bootloader : u-boot-1.1.4
  » File system : Ramdisk, jffs2

• S/W
  » Device Driver
  » 7″TFT LCD
  » UART 3Port, FF/ST/BT
  » Jffs2 Device Driver
  » CS8900 Ethernet
  » MMC/SD
  » USB Host
  » USB Client
  » AC’97 CODEC
  » Application : LED Lamp Control Application


LED BOARD
• H/W
  » Basic Circuit
     › 12V, 5V Supply
     › Red LED x 13(5V)
     › Green LED x 3(5V)
     › Blue LED x 3(5V)
     › Selector x 1(3pole 4position)
     › 1K VR x 2
  » Control 1
     › 12V, 5V Supply
     › Full Color LED x 16(5V)
     › Character LCD 8 x 2 Line
     › Atmega 128 MCU
     › Tack SW x 5(for using control)
  » Control 2
     › 12V, 5V Supply
     › Full Color LED x 9(5V)
     › Character LCD 8 x 2 Line
     › Atmega 128 MCU
     › Tack SW x 5(for using control)
  » Webbench
     › 12V, 5V Supply
     › White LED x 2(Steady, PWM Control)
  » AC LED
     › 220V, 12V Supply
     › M-AC LED x 1(110V~220V)
     › 10K VR(Dimming Control)
  » VLC
     › 12V, 5V Supply
     › Digital & Analog VLC Support
     › ATmega8 x 2(RX parts, TX parts)
     › 3.5pi Audio Jack(IN)
     › TX : Red LED x 8
     › RX : FND(Digital), Speaker(Analog)
  » Display
     › 12V, 5V Supply
     › Character LCD 8 x 2 Line
     › Atmega 128 MCU
     › USB B type x 1(PC to Mega128 Serial Com)

• S/W
  » Application
     › LED Lamp Control Application(LabVIEW, WEB)



GENERAL CHARACTERISTICS
• Dimension : 690(W) x 180(H) x 420(D)mm
• LED Basic operation experiment (Constant voltage, Constant current, 
  serial connection, and parallel connection)
• LED Brightness control, Color control, and lighting experiment
• LED control program practice
• Webbench Simulation
• Experiment LED operation using AC Dimming
• Experiment VLC(Visual Light Communication)
• LED control using PC LabVIEW program
• LED control using Web server
• LED control using Embedded GU 
• Cable (Power, Serial, Printer, USB, AVR ISP, ARM JTAG, UTP Corss) : 1set
• Manual : 1ea
• Program CD : 1ea
QT Program(Embedded GUI)

src=/upload/Image/1(4).jpg
 
< Main Screen >


src=/upload/Image/2(2).jpg
 

src=/upload/Image/3(4).jpg
< VLC Screen >
 
 


LabVIEW Program(PC GUI)

src=/upload/Image/4(3).jpg
 
CONFIGURATION
src=/upload/Image/9810-1.jpg